This kind of crusher is used for edible oil pretreatment . It can cracked oilseeds into 2/4/6/8 particles as your requirement .
● Whole closed structure.Both sides have a heat dissipation network. Front and back door plates can be opened,easy to be cleaned.Both sides of bottom have a material receiving port,easy to observe the effect of material.
● Brand:The Ni Cr Mo alloy roll is poured by centrifuge, the hard layer is uniform, the hardness is hs69± 3, and the chill depth is 25+/-5mm. The roller is tested by dynamic balance.
● Protecting cover、 front、back、up and down door plate are made of carbon plate.
● Equipment base: carbon steel welded base.
● Tight-roll function:Spring-tightened roller adopts round bearing seat.
● Leak proof device:Leakage proof material by pinnacle baffle.
● Pulley : CPT brand
● Bearing: ZWZ brand
● Driven motors: Famous brand of domestic
Item |
Unit |
Parameter |
Model |
- |
C4150 |
Capacity |
T/24H |
450-500 |
Raw material |
|
soybean,peanuts,rapseeds etc. |
Roller size |
MM |
400*1500 |
Chill depth |
MM |
25+/-5 |
Chill hardness |
HS |
69+/-3 |
Crushing size (adjustable) |
|
1/2-1/8 |
Roller speed |
RPM |
510/340 |
Total motor power |
KW |
44.55 |
Drive motor power |
KW |
44 |
Reducer power |
KW |
0.55 |
Approach weight |
TON |
7.5 |
Overall dimension(length× width× height) |
MM |
2700*1250*1950mm |